Posts Tagged ‘motorcycle helmet awareness’

 

h1 (3)

April is Motorcycle Helmet Awareness Month so we are doing a series of posts to try and do just that… provide awareness! This post is about “things” you should consider in order to make your helmet last and protect you longer.

1 – Keep the exterior clean. After your ride take a moment to clean the helmet shell of bugs and road grit. If you use an open face helmet also brush your teeth.

2 – Keep the interior clean. Yup sometimes your helmet can get funky. BUT you must be

h1 (5)

Might take some work to remove the dog smell

careful about cleaning the interior. Follow your owner’s manual on cleaning the inside of your helmet.

3 – Don’t use odor masking or sanitizing sprays on the interior of your helmet. Some sprays can degrade the foam under your padding, which will degrade its ability to keep you safe.

4 – Clean your visor. You must see right, so follow your brands instructions on cleaning the visor. But, be careful when working on the inside of the visor, most come with an anti-fog coating that needs to be properly handled….. DO NOT USE PAPER TOWELS on either side of your visor.

5 – Don’t grab or carry the helmet by the visor. Yes, we all know not to do this, but we all have. Really, try not to do this as it will damage the visor and possible the hinge point.

6 – Don’t hang your helmet from the mirror. As you should know the main part of the helmet that protects your head is the foam liner. Hanging your helmet from the mirror can cause the foam to compress where it sets on the mirror. Also how are your going to admire yourself with only one mirror.

7 – Keep your helmet ventilated. No, do not drill holes to get better air flow LOL. After you ride store your motorcycle helmet in a manner that will allow a good air flow to dry things out. Don’t just toss it in the helmet bag and into a closet…. Let it breath like a good wine!

The last two I had never thought about until researching this post.

8 – Don’t store your gloves in the motorcycle helmet. A couple sites stated some obvious things like….The gloves will restrict ventilation and not allow the padding to dry. Also the gloves will add their own “STINK” to the lining.

9 – Don’t slide your arm though the eye hole. The idea is that if you do this a lot, in order to free your hand for a task, your motorcycle helmet will get worn faster. That your jacket sleeve will cause undue wear an might also damage the inside of the visor.

 

Have any additional ideas on how to make your motorcycle helmet last longer? Add those ideas to the comments below.