Posts Tagged ‘slingshot recall’

recall

Be aware that this motorcycle recall list is for the United States, there is no way I could cover the entire world. But in the world of global manufacturing, if a motorcycle is being recalled in one country there is a good chance it is under recall in others. Also, this should not be considered a definitive list, check for yourself if you have any questions.

If you are US based use the NHTSA website http://www.safercar.gov. Enter your VIN number to see if your motorcycle is affected by the recall.

If you are based in Europe use the Safety Gate website to locate recalls that may impact you.

*****

Manufacturer: Polaris Industries, Inc.

SUMMARY: Polaris Industries, Inc. (Polaris) is recalling certain 2018-2019 Slingshot motorcycles. The driver-seat and passenger-seat seat belt and seat back anchoring bracket may have been improperly welded. Additionally, differences in the seat assembly may prevent proper latching of the seat slider, allowing the driver’s seat to move unexpectedly.

CONSEQUENCE: If the seat belt buckle or seat back detach from the seat base, there would be an increased risk of injury in the event of a crash. If the driver’s seat unexpectedly moves, it can cause the driver to lose control of the motorcycle, increasing the risk of a crash.

REMEDY: Polaris will notify owners, and dealers will inspect the seat belt bracket and seat back welds, and the seat slider latching function. If the weld is missing or incomplete, or if the slider doesn’t latch properly, the seat bases will be replaced, free of charge. The recall began on March 25,2019. Owners may contact Polaris customer service at 1-855-863-2284. Polaris’ number for this recall is T-18-01. Note: this recall is an expansion of recall 18V-195.

*****

Manufacturer: Triumph Motorcycles America, LTD

SUMMARY: Triumph Motorcycles America, LTD (Triumph) is recalling certain 2019 Speed Twin motorcycles. Improper routing of the coolant hose may cause it to contact the exhaust header pipe, damaging the hose and resulting in a coolant leak near the rear tire.

CONSEQUENCE: Loss of coolant near the rear tire may cause a loss of traction, increasing the risk of crash.

REMEDY: Triumph will notify owners, and dealers will inspect the coolant hose routing, rerouting the hose and replacing it if necessary, free of charge. The recall began April 15, 2019. Owners may contact Triumph customer service at 1-678-854-2010. Triumph’s number for this recall is SRAN563.

*****

Manufacturer: Ivolution Sports Inc. (Motorcycle Helmets)

SUMMARY:

Ivolution Sports, Inc. (Ivolution) is recalling certain IV2 HY808 helmets, part number Hy808, in sizes S, M, L and XL. These helmets may not adequately protect the wearer in the event of a head impact during a motorcycle crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 218, “Motorcycle Helmets.”

CONSEQUENCE: A helmet that does not adequately protect the wearer from an impact can increase the risk of injury in the event of a crash.

REMEDY: Ivolution will notify owners and provide a full refund for the helmets. The recall is expected to begin in April 2019. Owners may contact Ivolutution’ s customer service at 1-951-852-6327. Ivolution’s number for this recall is HY808-XL.

*****

Manufacturer: BMW of North America, LLC

SUMMARY:

BMW of North America, LLC (BMW) is recalling certain 2013-2018 BMW C600 Sport and C650 Sport and 2013-2019 C650 GT scooters. Repeated turning of the handlebars to the left most position may cause the front brake hose to crack and leak over time.

CONSEQUENCE: A brake fluid leak can reduce braking ability, increasing the risk of a crash.

REMEDY: BMW will notify owners, and dealers will replace the brake hose, adding an additional protective sleeve that will cover the hose connection fitting, free of charge. The recall is expected to begin April 22, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall includes scooters previously recalled under 15V-738.

*****

Manufacturer: Indian Motorcycle Company

SUMMARY: Indian Motorcycle Company (Indian) is recalling certain 2019 Indian Scout, Scout Bobber, and Scout Sixty motorcycles equipped with Anti-Lock Brake Systems (ABS). After the manufacturing process, air may remain trapped within the brake system, possibly reducing brake performance.

CONSEQUENCE: Reduced brake performance can increase the risk of a crash.

REMEDY: Indian has notified owners, and dealers will perform a brake fluid bleed of the front and rear ABS to evacuate the air, free of charge. The recall began March 7, 2019. Owners may contact Indian customer service at 1-877-204-3697. Indian’s number for this recall is I-18-07.

recall-1

Hey guys, below is the list of recalls that I have gathered from the 1st of August. In additions to motorcycle recalls a couple helmets are on the list as well.

Be aware that this list is for the United States, there is no way I could cover the entire world. But in the world of global manufacturing, if it is being recalled in one country there is a good chance it is under recall in others.

If you are US based use the NHTSA website www.safercar.gov. Enter your VIN number to see if your motorcycle is affected by the recall.

Manufacturer: MV Agusta Brutale 800 Dragster RC, F3 800RC, F3 800 DO NOT RIDE Summary:  MV Agusta is recalling certain 2018 MV Agusta Brutale 800 Dragster RC, F3 800RC, F3800 motorcycles. The motorcycles are equipped with a fork axle carrier that may have damaged threads which can cause excessive play of the wheel clamping screw. CONSEQUENCE: Excessive play in the front wheel could case loss of control and increase the risk of a crash.
REMEDY: Riders are advised not to ride their motorcycles until the repair has been performed. MV Agusta will notify owners and dealers will inspect the threaded holes in the fork axle carriers, and if necessary replace the fork leg free of charge. Owners may contact MV Agusta customer service at 1-215-781-1770.

Manufacturer: Polaris Industries, Inc. SLINGSHOT
SUMMARY:  Polaris Industries, Inc. (Polaris) is recalling certain 2017-2019 Polaris Slingshot S, Slingshot SL, Slingshot GT LE, and Slingshot SLR motorcycles. In the event of a crash, the seatbelt retractor on the side opposite of the impact may separate, preventing the seatbelt from locking.
CONSEQUENCE: In the event of a crash, if the seat belt does not lock, the occupant may not be properly restrained, increasing their risk of injury.
REMEDY: Polaris will notify owners, and dealers will install a kit that prevents the retractor from separating in the event of a crash, free of charge. The recall is expected to begin August 28, 2018. Owners may contact Polaris customer service at 1-855-863-2284. Polaris’ number for this recall is T-18-03.

Manufacturer: Akoury HELMETS
SUMMARY:
Akoury is recalling certain AK AK88S motorcycle helmets, sizes XS, S, M, L, and XL. These helmets may not adequately protect the wearer in the event of a head impact during a motorcycle crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 218, “Motorcycle Helmets.”
CONSEQUENCE:
A helmet that does not adequately protect the wearer from an impact can increase the risk of injury in the event of a crash.
REMEDY:
Akoury will notify owners, and will provide a replacement helmet or provide a refund, free of charge. The recall is expected to begin October 1, 2018. Owners may contact Akoury customer service at 1-514-824-0666. Akoury’s number for this recall is REC2015.

Manufacturer: Honda (American Honda Motor Co.) AFRICA TWINS
SUMMARY:
Honda (American Honda Motor Co.) is recalling certain Honda Genuine Accessory Centerstand Kits, part number 08M70-MJP-G50, sold for possible installation on 2016-2018 Africa Twin motorcycles. The circlip can break allowing the centerstand to detach.
CONSEQUENCE:
If the centerstand detaches while moving, it can become a road hazard, increasing the risk of a crash. If the centerstand detaches while the motorcycle is parked on the centerstand, the motorcycle can fall over, increasing the risk of injury.
REMEDY:
Honda will notify all registered owners of 2016-2018 Honda Africa Twins advising them that if they purchased the affected centerstand kit, not to use it and to take the motorcycle to a dealer. Dealers will replace the circlip and washer, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Honda customer service at 1-866-784-1870. Honda’s number for this recall is KJ5.

Manufacturer: H&H Sports Protection HELMETS
SUMMARY:
H&H Sports Protection (H&H Sports) is recalling certain VCAN V531 motorcycle helmets in sizes XS, S, M, L, XL, and XXL. The helmet straps may not be properly sewn and, as a result, the helmets may not stay secured to the rider’s head in the event of a crash. Additionally, the labels have an incorrect manufacturer’s name. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 218, “Motorcycle Helmets.”
CONSEQUENCE:
A helmet that does not remain secured to the rider’s head will not adequately protect the wearer in the event of a crash, increasing the risk of injury.
REMEDY:
The affected helmets were sold through Amazon. H&H Sports will notify the owners, and instruct them to return the helmets to Amazon. A complete refund of the purchase price and shipping costs will be provided free of charge. The recall is expected to begin in August 2018. Owners may contact Amazon customer service at 1-888-280-4331 or H&H Sports customer service at 1-626-444-0107 or by email at V531Recall@HHsportsprotection.com. .

Manufacturer: Alta Motors REDSHIFT EXR REDSHIFT MXR
SUMMARY:
Alta Motors (Alta) is recalling certain 2019 Alta Redshift EXR and 2018-2019 Alta Redshift MXR motorcycles. The software for the throttle control may fault if the throttle is rolled forward past the closed position, possibly resulting in a motorcycle stall.
CONSEQUENCE:
A motorcycle stall can increase the risk of a crash.
REMEDY:
Alta will notify owners, and dealers will install an update for the throttle software, free of charge. The recall is expected to begin in August 2018. Owners may contact Alta customer service at 1-415-230-0755. Alta’s number for this recall is SVC-ESB-18-004.

Manufacturer: Yamaha Motor Corporation, USA MT-07J MT07JC XSR700J XSR700JC
SUMMARY:
Yamaha Motor Corporation, USA (Yamaha) is recalling certain 2018 Yamaha MT-07J, MT-07JC, XSR700J, and XSR700JC motorcycles. The bolts that connect the drive chain guard to the swingarm may loosen, possibly causing the chain guard to contact the drive chain and break.
CONSEQUENCE:
If the chain guard breaks, it may fall onto the road, creating a road hazard and increasing the risk of a crash.
REMEDY:
Yamaha will notify owners, and dealers will replace both chain guard mounting bolts, free of charge. The recall is expected to begin in August 2018. Owners may contact Yamaha customer service at 1-800-962-7926. Yamaha’s number for this recall is 990120.

Manufacturer: Ducati North America PANIGALE V4, PANIGALE 959, PANIGALE 1299FE, HYPERMOTARDS
SUMMARY:
Ducati North America (Ducati) is recalling certain 2018 Ducati Panigale V4, Panigale 959, Panigale 1299 FE, and Hypermotard motorcycles. The friction material on the rear brake pads may detach from the backing plate.
CONSEQUENCE:
If the rear brake pad friction material detaches, it may lengthen the distance needed to stop the motorcycle, increasing the risk of a crash.
REMEDY:
Ducati will notify owners, and dealers will inspect the rear brake pads. Brake pads from the affected batch will be replaced, free of charge. The recall is expected to begin September 15, 2018. Owners may contact Ducati customer service at 1-888-391-5446.

Manufacturer: Brembo S.p.A. MOTORCYCLE BRAKES
SUMMARY:
If the rear brake pad friction material detaches, it may lengthen the distance needed to stop the motorcycle, increasing the risk of a crash.
CONSEQUENCE:
If the brake pad friction material detaches it can, inhibit braking ability, increasing the risk of injury and crash.
REMEDY:
Brembo will work with the affected vehicle manufacturers and distributors, and replace the defective brake pads, free of charge. The manufacturer has not yet provided a notification schedule.

Manufacturer: Badass Helmet Company      HELMETS
SUMMARY:
Badass Helmet Company (Badass) is recalling certain Trooper motorcycle helmets, model TR001.6, in sizes XS, S, M, L, XL, and 2XL. These helmets may not adequately protect the wearer in the event of a head impact during a motorcycle crash and they may not stay secured to the rider’s head. Additionally, the label inside the helmet may be incorrect in that it does not list the actual helmet manufacturer and does not list the model of the helmet. As such, these helmets fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 218, “Motorcycle Helmets.”
CONSEQUENCE:
A helmet that does not adequately protect the wearer from an impact can increase the risk of injury in the event of a crash.
REMEDY:
The remedy for this recall is still under development. The manufacturer has not yet provided a notification schedule. Owners may contact Badass customer service at 1-866-334-3563.