recall

Be aware that this motorcycle recall list is for the United States, there is no way I could cover the entire world. But in the world of global manufacturing, if a motorcycle is being recalled in one country there is a good chance it is under recall in others. Also, this should not be considered a definitive list, check for yourself if you have any questions.

If you are US based use the NHTSA website http://www.safercar.gov. Enter your VIN number to see if your motorcycle is affected by the recall.

If you are based in Europe use the Safety Gate website to locate recalls that may impact you.

*****

Manufacturer: Polaris Industries, Inc.

SUMMARY: Polaris Industries, Inc. (Polaris) is recalling certain 2018-2019 Slingshot motorcycles. The driver-seat and passenger-seat seat belt and seat back anchoring bracket may have been improperly welded. Additionally, differences in the seat assembly may prevent proper latching of the seat slider, allowing the driver’s seat to move unexpectedly.

CONSEQUENCE: If the seat belt buckle or seat back detach from the seat base, there would be an increased risk of injury in the event of a crash. If the driver’s seat unexpectedly moves, it can cause the driver to lose control of the motorcycle, increasing the risk of a crash.

REMEDY: Polaris will notify owners, and dealers will inspect the seat belt bracket and seat back welds, and the seat slider latching function. If the weld is missing or incomplete, or if the slider doesn’t latch properly, the seat bases will be replaced, free of charge. The recall began on March 25,2019. Owners may contact Polaris customer service at 1-855-863-2284. Polaris’ number for this recall is T-18-01. Note: this recall is an expansion of recall 18V-195.

*****

Manufacturer: Triumph Motorcycles America, LTD

SUMMARY: Triumph Motorcycles America, LTD (Triumph) is recalling certain 2019 Speed Twin motorcycles. Improper routing of the coolant hose may cause it to contact the exhaust header pipe, damaging the hose and resulting in a coolant leak near the rear tire.

CONSEQUENCE: Loss of coolant near the rear tire may cause a loss of traction, increasing the risk of crash.

REMEDY: Triumph will notify owners, and dealers will inspect the coolant hose routing, rerouting the hose and replacing it if necessary, free of charge. The recall began April 15, 2019. Owners may contact Triumph customer service at 1-678-854-2010. Triumph’s number for this recall is SRAN563.

*****

Manufacturer: Ivolution Sports Inc. (Motorcycle Helmets)

SUMMARY:

Ivolution Sports, Inc. (Ivolution) is recalling certain IV2 HY808 helmets, part number Hy808, in sizes S, M, L and XL. These helmets may not adequately protect the wearer in the event of a head impact during a motorcycle crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 218, “Motorcycle Helmets.”

CONSEQUENCE: A helmet that does not adequately protect the wearer from an impact can increase the risk of injury in the event of a crash.

REMEDY: Ivolution will notify owners and provide a full refund for the helmets. The recall is expected to begin in April 2019. Owners may contact Ivolutution’ s customer service at 1-951-852-6327. Ivolution’s number for this recall is HY808-XL.

*****

Manufacturer: BMW of North America, LLC

SUMMARY:

BMW of North America, LLC (BMW) is recalling certain 2013-2018 BMW C600 Sport and C650 Sport and 2013-2019 C650 GT scooters. Repeated turning of the handlebars to the left most position may cause the front brake hose to crack and leak over time.

CONSEQUENCE: A brake fluid leak can reduce braking ability, increasing the risk of a crash.

REMEDY: BMW will notify owners, and dealers will replace the brake hose, adding an additional protective sleeve that will cover the hose connection fitting, free of charge. The recall is expected to begin April 22, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall includes scooters previously recalled under 15V-738.

*****

Manufacturer: Indian Motorcycle Company

SUMMARY: Indian Motorcycle Company (Indian) is recalling certain 2019 Indian Scout, Scout Bobber, and Scout Sixty motorcycles equipped with Anti-Lock Brake Systems (ABS). After the manufacturing process, air may remain trapped within the brake system, possibly reducing brake performance.

CONSEQUENCE: Reduced brake performance can increase the risk of a crash.

REMEDY: Indian has notified owners, and dealers will perform a brake fluid bleed of the front and rear ABS to evacuate the air, free of charge. The recall began March 7, 2019. Owners may contact Indian customer service at 1-877-204-3697. Indian’s number for this recall is I-18-07.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.